We use cookies - Find out more
Telephone: 01502 716993
Part Identifier ?
R&D Marine Logo

R&D Marine 4" Split Clamp On Coupling for 25mm Shaft

Part No. 808414

£79.92 You pay £79.92 Incl VAT You pay £66.60 Excl VAT

RRP £86.40 £72.00

Save £6.48 (7.5%) Save £5.40 (7.5%)


Add to Wishlist
Brand R&D Marine
Country of Origin United Kingdom
Model 202-165C
Applications PRM, Borgwarner Velvet Drive, ZF, Hurth and Technodrive gearboxes.
Gearbox Output Coupling Diameter 4.00" / 101.6mm
Coupling PCD 3.25" / 82.55mm
Number of Fixing Holes 4
Coupling Register Diameter 2.50" / 63.5mm
Register Gender Male
Shaft Size 25mm

This clamp on split half coupling is machined from solid steel and mates with the gearbox output coupling to connect a 25mm diameter metric boat propeller shaft to the gearbox, usually via a flexible coupling.

The clamp on split type propeller shaft coupling is machined to suit the boat propeller shaft diameter but can accommodate the variations that can occur with normal boat propeller shaft tolerances. It is simple to install and can be adjusted to the required position on the shaft. This clamp on shaft coupling is bored only (no keyway) and is secured to the boat propeller shaft with the clamp bolts supplied.

Typical applications include:
4" nominal gearbox flanges of PRM, Borgwarner Velvet Drive, ZF, Hurth and Technodrive gearboxes.

Recommended torque for the clamp bolts: 54Nm (40 lbsft)

Coupling dimensions:
For propeller shaft diameter 25mm (bored only, no key way)
a - Flange outside diameter = 4.00"
b - Hole pitch circle = 3.25"
c - Number of holes = 4
d - Hose size = 10mm
e - Register diameter = 2.50" male
f - Coupling length = 3.19"
g - Coupling clamp boss diameter = 3.38"

Split Half Solid Shaft Coupling Dimensions Diagram

R & D Marine Clamp on shaft coupling number 202-165C

You may also need

This product has been added to your basket.