Scanstrut SPD-8-W ScanPod Deck Pod for Displays Up To 9" (Garmin)

Scanstrut SPD-8-W Deck Pod is designed for all leading brands and models of displays. The Deck Pod allows you to install your MFD on virtually on any flat surface onboard. This allows you to have your display in the prime position while out sailing on your powerboat or RIB. With the pull of a lever, the intuitive design gives you a 360-degree viewing angle to make the most from what your display has to offer.

Scanstrut Deck Pod SPD-8-W fits the following devices:

Chartplotters & Fishfinders:

- B&G Vulcan 7 (with flush mount), Vulcan 9, Zeus Touch 8, Zeus3 7, Zeus3 9, Zeus3s 7 & Zeus3s 9

- Furuno GP-1870, GP-1971F, O-Chart 5/5F & O-Chart 7/7F

- Garmin EchoMap 74sv, 73sv, 74dv, 73dv, EchoMap 9 Series, EchoMap CHIRP 75dv / 75sv, EchoMap CHIRP 95sv, EchoMap Plus 9, EchoMap UHD 9", GPSMap 7408/7608, GPSMap 820/820xs, GPSMap 840/840xs, GPSMap 922/922xs, GPSMap 923, GPSMap 943xsv, Striker Plus 9 & Striker Vivid 9sv

- Humminbird 800 series, 900 series & Helix 7

- Lowrance Elite 9 Ti / Ti2, Elite FS 7, HDS-8 / HDS-8m / Gen 2, HDS-9 Carbon, HDS-9 Gen3, HDS-9 LIVE, HOOK 9 / 9x & HOOK Reveal 9"

- Northstar 6100i 6.4" & 8.4", Explorer 6 & M84

- Raymarine A50, A50d, A57d, A70, A70d, Axiom 9, Axiom 9+, C Series - C70, C95 / C97, E95 / E97, Element 9 HV, Element 9 S, ES 75, ES 77 & ES 78

- Simrad Cruise 7, Cruise 9, GB40 10" Monitor, Go7 (with flush mount), Go9, Go9 XSE, NSS-8, NSS7 evo3, NSS9 evo3, NX40 & R2009/S2009

Instruments & Autopilots:

- B&G Nemesis 9

- Maretron TSM810C

- Northstar Explorer AP380

- Swivel & Tilt Base: One-handed quick-release action. Simply release the lever, swivel & tilt to suit your requirements before locking back into position.

- Best Viewing Angle: An adjustable ball joint allows a range of movement & multiple mounting angles.

- Added Strength: Inner bracing plate secures the deck pod base to the pod & gives increased rigidity to the assembly eliminating potential damaged from shock & vibration.

- Overhead Mounting: Deck Pod models can be overhead mounted.

- Hassle-Free Install & Service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe install & repeat servicing.

- Increased Protection: Deck Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.

- Supplied Uncut: As standard you will receive your Scanpod uncut. For a small charge factory cutting service is available.