Racor 500MA Fuel Filter (10 Micron / Heat Shield)
Part No: 301505
The Racor 500MA diesel fuel filter is designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and to protect precision engine components from dirt, rust, algae, asphaltenes,... Read more
The Racor 500MA diesel fuel filter is designed to be installed on the vacuum side of the fuel transfer pump for best efficiency and to protect precision engine components from dirt, rust, algae, asphaltenes, varnishes, and especially water, which is prevalent in engine fuels.
The Racor 500MA removes contaminants from fuel using the following legendary 3 stage process:
- Stage One: Separation: - As fuel enters the fuel filter assembly, it moves through the centrifuge and spins off large solids and - water droplets which fall to the bottom of the collection bowl.
- Stage Two: Coalescing: - Small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
- Stage Three: Filtration: - Proprietary Aquabloc II cartridge elements repel water and remove contaminants from fuel down to 10 micron (nominal). They are waterproof and effective longer than water absorbing elements.
Racor 500MA diesel fuel filter, with a see-through bowl, heat deflection shield and 10 micron element fitted. Part of the Parker Racor marine turbine series of fuel filters.
Replacement Racor turbine elements (2010 series) are available to order with various micron ratings, suitable for the Racor 500ma filter. Racor 2010 turbine elements measure 78mm diameter x 70mm high.
| Application | Diesel |
| Approvals | UL Listed, US Coast Guard & ISO Approved |
| Capacity Description | 3.7 oz (109ml) of Water |
| Flow Rate Description | 227 LPH (60 US GPH) |
| Height Description | 292mm (11.5") |
| Operating Temperature | From -40°C to +121°C (-40°F to +255°F) |
| Series | 500 Series |
| Size | (SAE J1926) 3/4"-16 UNF Female Ports |
| Width | 147mm (5.8") |
| Brand | Racor |
| Style | Turbine Filters |
| Fuel Filter Bowl Style | Transparent with Heat Shield |
| Element | 10 Micron |
| Filter Configuration | Single |
| Heat Deflection Shield | Yes |
| Integral Primer Pump | No |
| Dimensions | Element Removal Space: 102mm (4") |
| Maximum Pressure | 15 PSI (1 bar) |
| Model | 500MA |
| Pressure Drop | Clean: 0.3PSI (1.7 kPa) |
| Depth | 122mm (4.8") |
£457.75
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£457.75 Incl VAT
14 in stock
14 in stock
Please check with the store before travelling to avoid disappointment
