Please be aware: Due to Royal Mail strike action on the 24-25 November 22 there could be a delay receiving your order. For more information visit, Royal Mail.
Part No: RND-43AN49
43AN49 R & D Marine Damper Drive Plate (was 43AG49) Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst... Read more
43AN49 R & D Marine Damper Drive Plate (was 43AG49)
Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.
Also called the Driven Plate, Damper Plate or Clutch Plate, the 43AN49 Damper Drive Plate is from the R and D High Deflection element range. Common applications for the 43AN49 drive plate include SAE 7.5 flywheels mated to PRM80, PRM120, PRM150, TMC30, TMC40, TMC50, TMC60, Borgwarner 500, HBW5, HBW35, HBW50, HBW100, ZF5 or ZF 10 gearboxes.
The technical details:
- Spline: 10 teeth B10 x 23 x 29 DIN5464 (29mm diameter) for PRM, ZF, Hurth, Technodrive, Borgwarner 500, TMP gearboxes
- Diameter of back plate which bolts to the engine flywheel: 241.3mm (9.50")
- Back plate fixing holes: 8 x 8.5mm on 222.25mm pcd SAE7 1/2
- Maximum thickness of drive plate: 35mm (1.38")
Fitted with the softer type AN high deflection element for 270Nm 200 ft lb torque, providing a maximum deflection up to 30 degrees. This type of plate is especially suited to workboats with slow speed applications & pleasure boats. Note that this type of damper drive plate can only be fitted to rotate in the standard direction of rotation (anti-clockwise when looking at the flywheel) with the element facing the gearbox. These damper plates are also failsafe.
If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.
|Application||PRM 80, 90, 120, 125 & 150 gearbox, ZF 10 & 12 gearbox, Hurth HBW 5, 10, 15, 50 & 125 gearboxes, Technodrive TMC 30, 40, 50 & 60 gearboxes & Borgwarner 500.|
|Country of Origin||United Kingdom|
|Bolt Hole PCD [Pitch Circle Diameter]||8 x 8.5mm on 222.25mm PCD|
|Diameter||OD: 241.3mm (9.50")|
|Gearbox Spline||10 teeth B10 x 23 x 29 DIN5464 (29mm diameter)|
|Number of Fixing Holes||8|
|Thickness||Maximum: 35mm (1.38")|
|Torque||270 Nm, 200 lbft|
Sign up for the latest offers, product news, technical advice and more.