R&D Drive Plate for PRM Gearboxes (17 Teeth Spline, 266.7mm OD)
Part No: RND-18E36
18E36 Marine Engine Damper Drive Plate from R&D Marine.Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox,... Read more
18E36 Marine Engine Damper Drive Plate from R&D Marine.
Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.
Also called the Driven Plate, Damper Plate or Clutch Plate, the 18E36 Damper Drive Plate is from the R and D Loop element range. This drive plate is suitable for the PRM 301, PRM 302, PRM 401, PRM 402, PRM 500 and the PRM 750.
Technical Specifications:
- Spline: 17 Teeth 16/32 DP
- Fitted with a Loop element for 245 Nm 180 lb ft torque.
Flywheel Fixing Metric:
12 x 8.1 on 222.3
6 x 8.1 on 244.5
Spaced 3 groups of 2 apart 23°59`07
12 x 8.1 on 246
12 x 8.1 on 242
| Brand | R&D Marine |
| Element | Loop |
| Bolt Hole PCD Description | 12 x 8.1mm holes on 222.3mm PCD, 6 x 8.1mm holes on 244.5mm PCD Spaced 3 groups of 2 apart 23°59'07, 12 8.1mm holes on 246mm PCD, 12 x 8.1mm holes on 242mm PCD. |
| Diameter Description | OD: 266.7mm (10-1/2") |
| Gearbox Spline | 17 Teeth |
| Number of Fixing Holes | 5 |
| Torque | 245 Nm / 180 lb ft |
£212.86
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£212.86 Incl VAT
0 in stock
Please check with the store before travelling to avoid disappointment
