New Trade Only

Navico NAC-3 Autopilot Computer

Name: Navico NAC-3 Autopilot Computer
Brand: Navico
SKU: 000-13250-001
Price: 1669.99 GBP
Availability: InStock

Part No: 000-13250-001

The NAC-3 autopilot computer contains the electronics required to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with rudder feedback units and NMEA 2000 devices.Designed... Read more

Description

The NAC-3 autopilot computer contains the electronics required to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with rudder feedback units and NMEA 2000 devices.

Designed for vessels above 10 metres (33 feet) in length, the NAC-3 is rated to operate high-current drive pumps including the Simrad RPU160 and RPU300, mechanical drive units including the Simrad DD15, hydraulic linear drives such as the HLD2000 series and solenoid valves (30 amps continuous/50 amps peak).

The NA-3 can be controlled by various Simrad and B&G control units, such as dedicated autopilot controllers, Multifunction displays (MFDs) and autopilot remote controllers (used in combination with instrument systems, or any combination of the above).

PLEASE NOTE: A drive unit, heading sensor, NMEA 2000® network, and compatible autopilot controller or multifunction display are required to create a complete autopilot system. Some vessels may also require a rudder feedback unit.

Product contents:

• NAC-3 Autopilot Computer

• Navico N2K-T-RD NMEA2000 T-Connector (000-0119-79)

• N2KEXT-2RD 2ft NMEA2000 Cable (000-0119-88)

Specs:

• Compass safe: 0.5m (20 inches)

• Drive output: 12/24VDC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA)

• NMEA 2000 connectivity: 1x CAN terminal, 1 LEN

• Mounting type: Bulkhead

• NMEA 0183 Sentences supported: Input: AAM, ACK, APB, BOD, BWC, DPT, GGA, GLL, HDG, HDT, HSC, RMA, RMB, RMC, ROT, THS, TNT, VBW, VHW, VLW, VTG, ZDA. Output: HDG (10Hz) or HDT (10Hz), RSA (5Hz)

• Recommended fuse rating: Internal fuse 30A (Slow)

• Compass sensor support: NMEA2000, NMEA0183

• Engine Drive systems integration: Reversible pump/motor, Solenoid valve on/off

• Rudder sensor support: RF300, RF45X, RF25N, RF70 & VRF

Key Features

Recommended for boats above 10 metres (33 feet) in length

High-current output of 30 amps continuous, 50 amps peak

Clutch output (3 amps maximum)

Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves

Virtual rudder feedback for simplified installation aboard outboard and sterndrive (inboard/outboard) boats

Supports RF25 rudder feedback units

NMEA 2000® connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays

NMEA 0183® input

Specifications

Consumption	Typical: 100mA + Drive load / Max: 750W
Output	Drive: 12/24V DC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA)
Temperature Range	Operating: -15 to +55°C (5 to 131°F) / Storage: -30 to +70°C (-22 to +158°F)
Voltage Description	12V, 24V DC +30 -10%
Brand	Navico
IP Rating	IPX2
Warranty	2 Years
Contents	NAC-3 Autopilot Computer, Navico N2K-T-RD NMEA2000 T-Connector (000-0119-79), N2KEXT-2RD 2ft NMEA2000 Cable (000-0119-88)