MyCelx Replacement Element for Bilge Discharge Filters BK-2 and BPS2
Part No: 309802
The MyCelx replacement filter elements for the MyCelx BilgeKleen BK-2 and CleenLife BPS2 medium bilge discharge filters.When the MyCelx filter elements are used in conjunction with either the... Read more
The MyCelx replacement filter elements for the MyCelx BilgeKleen BK-2 and CleenLife BPS2 medium bilge discharge filters.
When the MyCelx filter elements are used in conjunction with either the MyCelx BilgeKleen filter or CleenLife filter and installed on the bilge pump discharge line it will effectively remove 99.9% of hydrocarbons (fuel and oils) from the bilge water without restricting bilge pump performance. Particle pre-filtration is recommended to extend media life of the MyCelx elements. The bilge filter element has an operating pH range of 3 to 11.
The MyCelx infused bilge filter elements removes the following contaminants from water - alkanes, alkenes, cycloalkanes, aromatic hydrocarbons, crude oils, sheen, tallow and other animal fats, vegetable oils, complex organics, monomers and polymers, organically bound metals, PCBs, MTBE, chlorinated organics, emulsions, POPs (aldrin, chlordane, DDT, dieldrin, endrin, heptachlor, hexachlorobenzene, mirex, PCBs, toxaphene).
MyCelx replacement elements for the BilgeKleen BK-2 and CleenLife BPS2 filter.
| Application | MyCelx BilgeKleen BK-2 & CleenLife BPS2 medium bilge discharge filters. |
| Flow Rate Description | 1022 LPH (270 US GPH) |
| Height Description | 254mm (10") |
| Operating Temperature | 49°C (120°F) Maximum |
| Brand | MyCelx |
| Country of Origin | United States |
| Unit of Sale | Single Unit |
| Diameter Description | 114.3mm (4-1/2") |
| Pressure Rating | 120 PSI (8.2 Bar) Maximum, Operating Pressure Drop: 1 PSI (0.06 Bar) |
£102.96
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£102.96 Incl VAT
3 in stock
3 in stock
Please check with the store before travelling to avoid disappointment
