Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.

Mastervolt Mass Combi Pro Inverter / Charger (12V / 3000W / 150A)

Part No: M38513000

The Mastervolt Mass Combi Pro combines a powerful 3 step battery charger along with a heavy duty true sine wave power inverter to provide AC output to operate household items. The unit can be connected... Read more

Description

The Mastervolt Mass Combi Pro combines a powerful 3 step battery charger along with a heavy duty true sine wave power inverter to provide AC output to operate household items. The unit can be connected up to shore power or a generator for charging and the AC output will automatically switch between mains and inverter mode. It has two separate AC outputs, allowing critical equipment to be put on a different circuit to other appliances to protect them from heavy loads. The inverter/charger is built to be reliable and user friendly, and is equipped with MasterBus Combi integration for easy operation along with the rest of your Mastervolt system.

The Mass Combi Pro features the Power Assist function, which prevents main fuses or breakers being tripped in the event of a weak power supply. It also eliminates power failures and dips to maintain reliable performance. The unit is equally capable at handling heavy loads and more sensitive loads, and with a true sine wave output will not cause harm or damage to your appliances. The high frequency technology used eliminates noise typically associated with power inverters, such as buzzing or humming.

This model can be used in a 3 phase system, or you can combine up to 10 units in parallel for higher power outputs.

Specifications sine wave inverter

Nominal DC voltage: 12 V (9.5-16 V)

Output voltage: 180-260 V, adjustable

Output frequency: 50/60 Hz (± 0.005 %), configurable

Output waveform: true sine

Continuous power at 40 °C / 104 °F, cos phi 1: 3000 W

Max. peak load: 6000 W

Max. efficiency: ≥ 90 %

Max. ripple on DC (battery at full load): < 5 %

No-load power consumption on DC (ON/inverter OFF/OFF): 26 W / 4 W / 0 W

Energy saving mode consumption: 7 W

Parallel configuration: yes, up to 10 units (for larger systems, an external transfer system is required)

3-Phase configuration: yes, up to 3x3

Synchronise with mains/generator: yes

Specifications battery charger

Input voltage range: 184-275 V

Max. input current: 12 A

Max. charge current at 40 °C / 104 °F: 150 A at 14.25 V, adjustable

Battery temperature sensor: yes, included

Battery voltage sense: through MasterShunt, otherwise automatic compensation

Specifications transfer system

AC input (generator): 50 A (switched)

AC input: 30 A (switched)

AC output 1: 67 A

AC output 2: 50 A (switched)

AC input fuse: no

Transfer speed: seamless (< 1 ms)

Transfer voltage range: 184-275 V, adjustable

Transfer frequency range: 35-68 Hz, adjustable

General specifications

Galvanic isolation: yes

Display/read-out: LED display

Dimensions, hxwxd: 472 x 318 x 178mm (18.6 x 12.5 x 7.0 inch)

Weight: 15.3 kg (3.7 lb)

Compliance: CE, E-mark, ABYC

Technical specifications

Charge characteristic: IUoUo, automatic / 3-step+ for Gel/AGM/MLI/ flooded/spiral/traction

Recommended battery capacity: ~ 300-900 Ah (based on gel batteries, may differ for other types)

Ground relay: yes, configurable

Temperature range (ambient temp.): -25 °C to 60 °C, derating > 40 °C (-13 °F to 140 °F)

Cooling: vario fan

Protection degree: IP23 (vertical mounting)

Safety class: IEC protection class I

Humidity protection: conformal coating, max. 95 % relative humidity, non condensing

Protections: over temperature, overload, short circuit, high/low battery voltage

Power Assist: yes

MasterBus compatible: yes

Key Features

For professional & semi-professional use

Quiet, powerful inverter with 200% peak power

Compact, lightweight & hum-free thanks to HF technology

Pure sine wave voltage prevents malfunctions & damage to sensitive equipment (adapters)

High yield & more power from your batteries

Intelligent 3-step+ battery charger with low DC ripple current for fast charging times & long battery life

Power Assist prevents blown fuses

Dynamic battery voltage window to enjoy AC power for longer without damaging batteries

Active Optima Cooling concept prevents unnecessary fan noise

Quick installation & reliable professional connections

CE & ABYC certified

Specifications
Approvals CE, E-mark, ABYC Compliant
Height Description 472mm (18.6")
Operating Temperature Ambient: -25°C to 60°C (-13°F to 140°F), derating > 40°C
Temperature Range Ambient Temperature: -25 °C to 60 °C, derating > 40 °C (-13 °F to 140 °F)
Voltage Description Input voltage range: 184V - 275V, Output: 180V - 260V adjustable, Nominal DC: 12V (9.5V - 16V)
Wattage 3000W
Weight 15.3 kg (33.7 lb)
Width 318mm (12.5")
Brand Mastervolt
IP Rating IP23
Depth 178mm (7.0")
Ask a Question
Mastervolt Mass Combi Pro Inverter / Charger (12V / 3000W / 150A)

£3,286.75

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

£3,286.75 Incl VAT

 2 in stock

View Trade Prices
Quantity
Check stock in store
Beccles

0 in stock

 Please check with the store before travelling to avoid disappointment

Get offers in your inbox

Sign up for the latest offers, product news, technical advice and more.

By submitting your details you consent to our Privacy Notice.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.