Maestrini DZR Brass Anti-Siphon Device Kit (25mm Hose / 10mm Vent)
Part No: 410093
Maestrini anti-siphon loop and breaker valve kit supplied with hose tails for a complete hose line anti-siphon installation. This kit is supplied with the following parts to create a working anti-s Read more
Maestrini anti-siphon loop and breaker valve kit supplied with hose tails for a complete hose line anti-siphon installation. This kit is supplied with the following parts to create a working anti-siphon device:
1 x DZR brass loop with two 1" BSPF ports and one 1/2" BSPF port (410065)
1 x DZR brass siphon valve with one 1/2" BSPM and one 3/8" BSPF port (410099)
2 x DZR brass 1" BSPM to 25mm hose tails (435054)
Once assembled, these give a complete anti-siphon device suitable for 25mm hose lines and a 10mm vent hose. This will only allow water to flow in the intended direction and will create a vacuum if the flow is reversed. Typical installations for an anti-siphon device are sea water intakes, exhaust injection lines and toilet systems where the equipment installed is below the waterline.
| Material | DZR Brass Bend & Hose Tails. Valve is DZR Brass with a Rubber Valve |
| Brand | Maestrini |
| Hose Tail Size | 25mm / 1" |
| Primary Construction | DZR / CR Brass |
| Valve Design | Siphon Break Valve |
| Country of Origin | Italy |
| With Valve | Yes |
| Hose Size | Suits ID: 25mm (1") (with 10mm (3/8") connection for vent line) |
£113.84
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
