Jabsco 50580-2201 Bronze Clutched Pump (12V / 1" BSP / 16mm Pulley)
Part No: 505232
Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and is 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is c Read more
Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and is 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head.
This bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids.
Jabsco 50580-2201 Spare Parts:
Part ID | Spare Parts | Part Number | Quantity
1 | Bearing | SP2601-0468 | 2
3 | Cam | 53082-0000 | 1
4 | End Cover | 50355-0000 | 1
5 | Electro Magnetic Clutch - Field Coil 12V | SP2300-0063FCUS | 1
6 | Screw | X3001-176FB | 7
7 | Impeller & Gasket Kit | 17937-0001-P | 1
8 | Key | SP1401-10 | 1
9 | Seal Assembly | 96080-0620 | 1
10 | O-Ring | X4020-106A | 1
11 | O-Ring | X4020-215A | 1
12 | O-Ring (3 Pack) | 18753-0263 | 1
14 | Retaining Ring (3 Pack) | 91700-0620 | 1
15 | Retaining Ring (3 Pack) | 18713-0000 | 1
16 | Dowel Pin | SP3100-10 | 1
17 | Electro Magnetic Clutch Pulley Assembly (Single 'B' Groove) | SP2300-0063RA | 1
18 | Screw (10 Pack) | X3003-176F-P | 1
21 | Spline Plug (3 Pack) | 4345-0000 | 1
22 | Washer | 29706-0000 | 1
23 | Wearplate | 4156-0000 | 1
| Flow Rate Description | 4800 LPH (1268 US GPH) at 1500 RPM 3m head |
| Fuse | 5A |
| Height Description | 101mm (4") Excluding Pulley |
| Length | 160mm (6.5") |
| Series | 50580 Series |
| Size | Pulley Size: Single B Section (16mm) |
| Voltage Description | 12V DC |
| Width | Excluding Pulley: 120mm (4.75") |
| Brand | Jabsco |
| Clutched Pump Pulley Size | Single B Section - 16mm |
| Automatic Bilge Pumps | No |
| Bearing Type | Heavy Duty |
| Maximum Pump Head | Over 4.27 Metres |
| Seal Type | Mechanical Seal |
| Warranty | 1 Year |
| Maximum Recommended Head | 20 Metres (65 Feet) |
| Model | 50580-2201 |
| Replacement Impeller | JAB-17937-0001-P |
| Self Primes up to | 2.4 Metres (7.9 Feet) |
| Inlet Outlet | 1" BSP Female Thread |
£863.18
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
