Seaflow Hoses, Clamps and Clips

A1 & A2 Fuel Hose

All hosing used for marine fuel must have an ISO7840 rating which means it conforms to fire safety regulations. Some people use copper pipe for their fuel lines which is fine, but copper can become brittle over time and is much harder to work with, whereas rubber hose can be shaped and routed more easily, especially when retro fitting.

A1 hoses are suitable for use throughout the system, including in enclosed areas where fuel vapours may build up, and are typically used for fuel lines running from the tank to the engine, or anywhere fuel is continuously present. A2 hoses are intended for use outside engine compartments and are generally recommended for applications such as vent lines to the tank where fuel is only present intermittently.

Sanitation Hose

Sanitation hose is one of those things that is well worth paying extra for to save you having unwanted smells around your vessel. With the butyl rubber and non permeable option, you can be sure that the unwanted smells will be contained within the hose.

Exhaust Hose

A robust yet very flexible hose for use in water cooled exhaust systems. It is easily fitted and with its flexibility and wire reinforcement, it can be fitted around tight bends without the hose collapsing. Seaflow exhaust hose is Lloyds registered and R.I.N.A approved.

Premium Hot Water Hose

Suitable for hot water mixed with steam and non-corrosive liquids and is mainly used in the cooling water system on your boat. It can withstand temperatures of -30 to 120 degrees. 

We also supply a non-premium version which generally do not provide the same level of durability to environmental stresses, which can impact performance and service life.

Water Intake Hose

Conforms to ISO 13363 and is fire retardant. It is a quality choice for your engine cooling water intake and will meet boat safety standards.

Food Quality Plumbing Hose

This hose is food grade which leaves no taste or odour in compliance with European Regulation 2007/19/EC and is R.I.N.A approved. Suitable for water transfer of liquids such as mineral water, fruit juices and other liquids up to 15% alcohol content.

Muti-Purpose Hose

Suitable as a connection for bilge pumps and for many different types of fluid transfer (excluding fuels) such as water and liquid foods which do not contain fats and with a maximum alcohol content of 28%.

Hose Clips

It is very important to fit high quality hose clips so you can be rest assured that your hose is securely attached. We supply the original Jubilee clips that have been put through rigorous tests and have been found to exceed the British standards in strength, corrosion resistance and pressure tests. 
Hose clips are often referred to by the brand name of Jubilee clips. We can offer standard hose clips, high torque clips and superclamps.