This is our full range of brass fittings available, suitable for routing rigid pipe work and flexible hose between different areas of the boat. Most of the fittings are measured in BSP, which use the inside diameter as the measurement e.g. a 3/4" BSP fitting will actually measure 1" all the way across the threads. Brass hose fittings are also available with NPT, UNF and Compression. Our range of brass hose fittings includes: Adaptors, Blanking Caps, Bulkhead Fittings, Bush Fittings, Coupling, Cross Fittings, Elbow, Fitting Kits, Hose Connectors, Hose Tails, Nipples, Nuts, Olives, Pipe Manifolds, Plug, Scoop Strainers, Sender Fittings, Through Hull Skin Fittings, Sockets, Stop Ends, T Pieces / Tee Pieces, Unions, Washers and Y Pieces. For more information or for advice about what fittings you need, our technical team are happy to help. Below are the specifications of brass used in our range of fittings: Brass (CW614N) Composition Min Max Copper 57% 59% Aluminium - 0.05% Iron - 0.3% Nickel - 0.3% Lead 2.5% 3.5% Tin - 0.3% Zinc Remainder Other Elements - 0.2% Brass (CW617N) Composition Min Max Copper 57% 59% Aluminium - 0.05% Iron - 0.3% Nickel - 0.3% Lead 1.6% 2.5% Tin - 0.3% Zinc Remainder Other Elements - 0.2%
This is our full range of brass fittings available, suitable for routing rigid pipe work and flexible hose between different areas of the boat. Most of the fittings are measured in BSP, which use the inside diameter as the measurement e.g. a 3/4" BSP fitting will actually measure 1" all the way across the threads. Brass hose fittings are also available with NPT, UNF and Compression. Our range of brass...
Read moreSign up for the latest offers, product news, technical advice and more.