Whale Gulper IC Diaphragm Grey Waste Pump (12V / 19LPM / 19-25mm Hose)
Part No: W-BP2082B
The Whale Gulper IC is a high capacity waste pump with intelligent control electronics built in. At the heart of every Whale IC product lays innovative electronic control circuitry.The Whale... Read more
The Whale Gulper IC is a high capacity waste pump with intelligent control electronics built in. At the heart of every Whale IC product lays innovative electronic control circuitry.
The Whale Gulper IC grey waste water pump communicates via electronic signals with either the Gulley IC or Two Way Manifold IC only when grey waste water needs to be pumped out. The Whale Gulper IC grey waste pump must be used with any IC accessory such as the Gulley IC or Two Way Manifold IC.
Whale Gulper IC Features & Benefits
- Secure fit - new wrap around mounting feature.
- Head rotates 360° to suit your installation.
- IC built in intelligent control microprocessor electronics sealed for protection against water ingress.
- Pre-wired with waterproof electric connectors to prevent damage from capillary action and electrolysis.
- No filter to block or clean non-choke valves.
- Automatic control - receives electrical signals to turn on/off as required.
- Soft start protects the pump for long life.
- Electronics enable use with lower current switches.
- One pump handles waste from multiple drains.
- Self-primes and runs dry.
- Easy to install - including uneven surfaces.
- Time delay to allow for optimum drainage.
- Override wire included to allow for manual activation.
| Approvals | CE Marked |
| Flow Rate Description | 19 LPM (4.16 GPM / 5 US GPM) |
| Fuse | 10A Automotive |
| Height Description | 117mm (4-5/8") |
| Length | 280mm (11") |
| Material | Glass-filled Nylon Pump Head, Santoprene Valves & Diaphragm |
| Voltage Description | 12V DC (Voltage Range: 12V - 13.6V) |
| Width | 198mm (7.8") |
| Brand | Whale |
| Country of Origin | United Kingdom |
| Maximum Pump Head | 2.3 to 4.27 Metres |
| Warranty | 2 Years |
| Hose Size | 19mm / 3/4", 25mm / 1" |
| Maximum Combined Head and Lift | 4m (13.1ft) |
| Maximum Recommended Head | 3 Metres (9.8 Feet) |
| Model | BP2082B |
| Self Primes up to | 3 Metres (9.8 Feet) |
| Wire Size | Minimum 1.5mm² (16 AWG) |
| Inlet Outlet | 19mm or 25mm (3/4" or 1") ID Hose |
| Amps Description | Up to 9A |
£234.79
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£234.79 Incl VAT
£260.89 Save £26.1 (10%)
8 in stock
4 in stock
Please check with the store before travelling to avoid disappointment
