We use cookies - Find out more
Telephone: +44 (0)1502 716993
Part Identifier ?
R&D Marine Logo

R&D Drive Plate For Borgwarner (26 Teeth Spline / 287.4mm Diameter)

Part No. RND-3L25

$207.35 You pay $207.35 Incl Tax You pay $172.79 Excl Tax

RRP $224.16 $186.80

Save $16.81 (7.5%) Save $14.01 (7.5%)


Add to Wishlist
Brand R&D Marine
Country of Origin United Kingdom
Element Hammer Head
Gearbox Model Borgwarner 70, Borgwarner 71, Borgwarner 72, Borgwarner 73, Paragon, PRM 301A, PRM 302A, PRM 401A, PRM 402A, PRM 601A, PRM 750A, TMP 1200, TMP 1500, TN 90, TN 170, TN 260, TN 345, TN 485, TN 545, TN 880, Twin Disc 501, Twin Disc 502, ZF Hurth HBW 250, ZF Hurth HBW 360, ZF Hurth HSW 125, ZF Hurth HSW 450, ZF Hurth HSW 630A, ZF Hurth HSW 800A, ZF IRM220A
Suitability Borgwarner 70, 71, 72 & 73, PRM Inline gearboxes, Paragon P series, Technodrive TN 90, 170, 260, 345, 485, 545 & 880, TMP 1200 & 1500, Twin Disc 501 & 502, some Volvo saildrives, ZF IRM220A, Hurth HBW 250 & 360, HSW 125, 450, 630 & 800 gearboxes.
Gearbox Spline 26 teeth 20/40 DP (35.4mm diameter)
Diameter OD: 287.4mm (11.312")
Torque 420 Nm, 310 lbft
Bolt Hole PCD (Pitch Circle Diameter) 6 x 9.1mm on 269.96mm PCD & 6 x 6.3mm on 269.96mm PCD
Number of Fixing Holes 6
Thickness Maximum: 35mm (1.38")

3L25 R & D Marine Damper Drive Plate

Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 3L25 Damper Drive Plate is from the R and D hammer head element range. The 3L25 Drive Plate will suit engines such as Volvo's TAMD 40.

The technical details:
Spline: 26 teeth 20/40 DP (35.4mm diameter) for Borgwarner 70, 71 & 72 Velvet Drive gearboxes, Hurth HSW and HBW250, ZF IRM220A, Paragon P series, Technodrive TM 93, 170, 260, 345, 485, 545 & 880 gearboxes, Twin Disc 501 & 502, TMP 1200 & 1500 gearboxes, PRM inline gearboxes and some later Volvo saildrives.
Diameter of back plate which bolts to the engine flywheel: 314.3mm 12.375"
Back plate fixing holes: Multi-punched plate offers 6 x 9.1mm on 269.96mm PCD and 6 x 6.3mm on 269.96mm pcd.
Maximum thickness of drive plate: 35mm (1.38")
Fitted with the multi-directional 'L' Hammer Head element for 420Nm 310 ft lb torque, providing a smaller element diameter which is more torsionally flexible than the loop type elements and provides three stage stiffness with up to 9 degrees of deflection. The 3L25 damper drive plate is also fail safe.

If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.

You may also need

This product has been added to your basket.