We use cookies - Find out more
Telephone: +441502 716993
Part Identifier ?
Rule Logo

Rule Mate 1100 Automatic Submersible Bilge Pump (12V / 69 LPM / 28mm)

Part No. 504188

£92.78 You pay £92.78 Incl VAT You pay £77.32 Excl VAT

RRP £103.09 £85.91

Save £10.31 (10.0%) Save £8.59 (10.0%)


0 reviews
Add to Wishlist
Brand Rule
Series Rule 1100
Model RM1100A
Automatic Bilge Pumps Yes
Voltage 12V DC
Fuse 5A
Amps 3.3A at 12V, 5.0A at 13.6V
Flow Rate at Zero Head 4164 LPH (1100 US GPH)
Flow Rate at 1 Meter Head 3255 LPH (860 US GPH)
Flow Rate at 2 Meter Head 2081 LPH (550 US GPH)
Maximum Recommended Head
Outlet For 28mm (1-1/8") ID Hose
Length 152mm (6")
Width 83mm (3-1/4")
Height 114mm (4-1/2"), Switch cut in height: 63.5mm (2-1/2"), Switch cut off height: 19mm (3/4")
Certification / Approvals ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification
Warranty (Years) 3
Notes Includes Fail Safe Back Up Feature To Protect The Pump & The Boat's Battery Supply.

The Jabsco Rule Mate RM1100A 1100 series automatic submersible bilge pump eliminates the need for a separate float switch to activate the pump. Once power is supplied to the bilge pump, starting and stopping is completely automatic.

The new model of Rule Mate bilge pumps feature a wire coil with a magnet cased in a box as opposed to a mercury float, allowing for space saving to be made. The electromagnetic field is disrupted by water resistance around the box and the pump is activated. The pump also includes a pump check feature where you can test your pumps performance with a wet finger!

The Rule automatic submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The automatic bilge pump features two leads, an automatic (brown) and a manual override (brown with a white stripe). The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.

The Rule submersible bilge pump comes complete with a straight and 90° hose tail barb for 28mm (1-1/8") ID hose. The built-in automatic bilge pump sensor detects the presence of pure engine oil only and will not activate the pump which minimises the discharge of hazardous materials into the surrounding waterway.

The Rule 1100 series of small submersible bilge pumps are recommended for discharge heads up to a maximum of 3.6 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.

Rule Mate pumps feature a backup device that knows if the electronic bilge switch becomes covered by oil, grease and debris, by checking for water resistance against the impeller. If no water is present the pump will revert to an auto-timed mode, where the pump cycles every 2.5 minutes to check for water, until the sensor has been cleaned. Once the switch is cleaned the pump will revert back to the level sensing mode.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...