Rule 25DA 500 Submersible Bilge Pump (12V / 31 LPM / 19mm Hose)
Part No: JAB-25DA
Rule 25DA 500 Series submersible bilge pump with a flow rate of up to 31 litres per minute (8 gallons).The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body... Read more
Rule 25DA 500 Series submersible bilge pump with a flow rate of up to 31 litres per minute (8 gallons).
The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.
The Rule 500 range of small submersible bilge pumps are recommended for discharge heads up to a maximum of 2 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.
The Rule 25DA replaces the 12 volt Rule 25D and has the following features:
- Higher Flow - through an optimised impeller, the 25DA is able to provide greater flow at the same amperage
- Built-in Thermal Cut-Off (TCO) - this provides extra protection for both the pump and the vessel it is installed in
- Back Flow Prevention - the check valve reduces the amount of water left in the bilge, minimising odour and helping to keep your bilge cleaner
- Hidden Air Vents in the Body - these vents help prevent air-locking in challenging plumbing installations and helps with the check valve
- Threaded Discharge - this allows for easier pump installation, and easier maintenance
- Base Fits Existing Rule 25D Screw Holes
Key Features
Light, compact pump for ski-boats and small vessels
Tough plastic body with integral strainer
Quick release inlet strainer allows rapid cleaning
Low amp draw conserves batteries
Built-in thermal cut-off
Motor rated for 1500-hour life
Check Valve included for back flow prevention
Vented body to prevent air locking
Threaded port for easier installation and maintenance
Base not interchangeable with old range but can be fitted to existing screw holes
| Approvals | ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification |
| Consumption | 1.9 a |
| Flow Rate Description | 1892 LPH (500 US GPH) |
| Flow Rate 1 Metre Head | 1362 LPH (360 US GPH) |
| Fuse | 3A |
| Height Description | 99mm (3.9") |
| Length | 74mm (2.9") |
| Material | Tough Plastic Body |
| Outlet | 19mm (3/4") ID Hose |
| Output | 50 Ltr |
| Series | Rule 500 |
| Voltage Description | 12V DC |
| Width | 64mm (2.5") |
| Brand | Rule |
| Primary Construction | Plastic |
| Automatic Bilge Pumps | No |
| Maximum Pump Head | 0 to 2.2 Metres |
| Warranty | 3 Years |
| Connections Description | 19mm (3/4") |
| Flow Rate 2 Metre Head | 984 LPH (260 US GPH) |
| Hose Size | 19mm / 3/4" |
| Ignition Protected | Yes |
| Maximum Recommended Head | 2 Metres (6.5 Feet) |
| Model | 25DA |
| Replaces | 504152 - Rule 25D 500 Submersible Bilge Pump |
| Amps Description | 1.6A at 12V, 1.8A at 13.6V |
£23.95
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£23.95 Incl VAT
£29.95 Save £6 (20%)
16 in stock
16 in stock
Please check with the store before travelling to avoid disappointment
