We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier
R&D Marine Logo

R&D Drive Plate | 26 Teeth Spline | Borgwarner | 298.5mm Diameter | 180 lb ft Torque

Part No. RND-3E1

£137.12 You pay £137.12 Incl VAT You pay £114.27 Excl VAT

RRP £148.24 £123.53

Save £11.12 (7.5%) Save £9.26 (7.5%)


0 reviews

Add to Wishlist
Brand R&D Marine
Country of Origin United Kingdom
Element Loop
Gearbox Model Borgwarner 70, Borgwarner 71, Borgwarner 72, Borgwarner 73, Paragon, PRM 301A, PRM 302A, PRM 401A, PRM 402A, PRM 601A, PRM 750A, TMP 1200, TMP 1500, TN 90, TN 170, TN 260, TN 345, TN 485, TN 545, TN 880, Twin Disc 501, Twin Disc 502, ZF Hurth HBW 250, ZF Hurth HBW 360, ZF Hurth HSW 125, ZF Hurth HSW 450, ZF Hurth HSW 630A, ZF Hurth HSW 800A, ZF IRM220A
Suitability Borgwarner 70, 71, 72 & 73, PRM Inline gearboxes, Paragon P series, Technodrive TN 90, 170, 260, 345, 485, 545 & 880, TMP 1200 & 1500, Twin Disc 501 & 502, some Volvo saildrives, ZF IRM220A, Hurth HBW 250 & 360, HSW 125, 450, 630 & 800 gearboxes.
Gearbox Spline 26 teeth 20/40 DP (35.4mm diameter)
Diameter OD: 298.5mm (11.75")
Torque 245 Nm, 180 lbft
Bolt Hole PCD (Pitch Circle Diameter) 6 x 8.1mm on 200mm PCD, 6 x 8.1mm on 250mm PCD, 6 x 8.1mm on 269.9mm PCD, 6 x 8.1mm on 273mm PCD.
Number of Fixing Holes 6
Thickness Maximum: 35mm (1.38")

3E1 R & D Marine Damper Drive Plate for boat engines.

Fitted between the marinised engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 3E1 Damper Drive Plate is from the R and D Loop element range.

The technical details:
Spline: 26 teeth 20/40 DP (35.4mm diameter) for Borgwarner 70, 71, 72 C Velvet Drive gearboxes, PRM inline gearboxes, TMP, Paragon and Twin Disc Boxes, ZF Hurth HSW gearboxes and some Volvo Saildrive legs.
Diameter of drive plate back plate which bolts to the engine flywheel: 298.5 mm 11.75"
Back plate fixing holes: multi-punched offering the following fixing holes arrangement 6 x 8.1mm on 200mm PCD, 6 x 8.1mm on 250mm PCD, 6 x 8.1mm on 269.9mm PCD, 6 x 8.1mm on 273mm PCD.
Maximum thickness of drive plate: 35mm (1.38")
Fitted with a type E loop element for 245Nm 180 ftlb torque, which can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...