R&D Drive Plate For PRM & ZF Hurth (10 Teeth Spline, 155mm OD)
Part No: RND-22B4
22B4 Marine Engine Damper Drive Plate from R&D MarineFitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox,... Read more
22B4 Marine Engine Damper Drive Plate from R&D Marine
Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.
Also called the Driven Plate, Damper Plate or Clutch Plate, the 22B4 Damper Drive Plate is from the R and D Loop element range. Common applications for the 22B4 drive plate include BMC, Ford and Perkins engines which have a flywheel with the 6.125" diameter fixings aperture. It can be used to replace PRM drive plate MT8112.
R&D Marine drive plate technical details:
- Spline: 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter) for PRM 80, 120 & 150 gearboxes, Hurth ZF & HBW, Technodrive TMC 30, 40, 50, 60 gearboxes and the Borgwarner 500.
- Diameter of drive plate back plate which bolts to the engine flywheel: 155.45mm (6.125")
- Back plate fixing holes: The small back plate has 5 x 6.35mm holes (0.25") on 142mm PCD (5.593). This was a very common fixing arrangement for BMC, Leyland, Thornycroft and Perkins engines
- Drive plate maximum thickness: 32mm (1.25")
Fitted with a type B loop element for 135Nm 100 ft lb torque, which can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe.
If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.
| Application | BMC, Ford and Perkins engines which have a flywheel with the 6.125" diameter fixings aperture. PRM 80, 90, 120, 125 & 150 gearbox, ZF 10 & 12 gearbox, Hurth HBW 5, 10, 15, 50 & 125 gearboxes, Technodrive TMC 30, 40, 50 & 60 gearboxes & Borgwarner 500. |
| Brand | R&D Marine |
| Suitable For | Beta Marine |
| Country of Origin | United Kingdom |
| Element | Loop |
| Bolt Hole PCD Description | 5 x 6.35mm holes (0.25") on 142mm PCD (5.593). |
| Diameter Description | OD: 155.45mm (6-1/8") |
| Gearbox Spline | 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter) |
| Number of Fixing Holes | 5 |
| Replaces | PRM Drive Plate MT8112 |
| Thickness | Maximum: 32mm (1.25") |
| Torque | 135 Nm, 100 lbft |
£104.02
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£104.02 Incl VAT
£115.58 Save £11.57 (10%)
10 in stock
5 in stock
Please check with the store before travelling to avoid disappointment
