Racor 1000FH Fuel Filter (10 Micron / Clear Bowl)
Part No: 301702
Racor 1000FH10 diesel turbine fuel filter is designed to protect your precious engine components from various contaminants such as dirt, rust, algae, asphaltenes, varnishes and water.The Racor... Read more
Racor 1000FH10 diesel turbine fuel filter is designed to protect your precious engine components from various contaminants such as dirt, rust, algae, asphaltenes, varnishes and water.
The Racor 1000FH diesel filter comes complete fitted with a see-through bowl and a 10 micron element. The turbine has a maximum flow rate of 681 LPH through a port size of 7/8"-14 UNF.
Replacement Racor turbine elements (2020 series) are available to order with various micron ratings, suitable for the Racor 1000FH. Racor 2020 turbine elements measure 110mm diameter x 249mm high.
The Racor 1000FH marine turbine is designed to be fitted on the vacuum side of the fuel transfer pump for maximum efficiency. The Racor turbine filters work through a three stage process; Separation Coalescing & Filtration explained below.
- Stage One: Separation: As fuel enters into the fuel filter assembly; it moves through the turbine centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
- Stage Two: Coalescing: Small water droplets bead-up along the sides of the chamber and on the element, once heavy enough these too fall into the bottom of the collection bowl.
- Stage Three: Filtration: Algae, rust and dirt are then filtered from the fuel by the Aquabloc element, as the elements are waterproof they are much more effective and long lasting than water absorbing elements.
| Application | Diesel |
| Flow Rate Description | 681 LPH (180 US GPH) |
| Height Description | 559mm (22") |
| Series | 1000 Series |
| Size | 7/8"-14 UNF Female Ports (SAE J1926) |
| Width | 152mm (6") |
| Brand | Racor |
| Style | Turbine Filters |
| Fuel Filter Bowl Style | Transparent Bowl |
| Country of Origin | United States |
| Element | 10 Micron |
| Filter Configuration | Single |
| Heat Deflection Shield | No |
| Integral Primer Pump | No |
| Dimensions | Element Removal Space: 254mm |
| Maximum Pressure | 15 PSI (1 bar) |
| Model | 1000FH |
| Pressure Drop | Clean: 0.25PSI (1.7 kPa) |
| Depth | 178mm (7") |
£530.62
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£530.62 Incl VAT
0 in stock
Get notified when it's back in stock
0 in stock
Please check with the store before travelling to avoid disappointment
