R&D Drive Plate For ZF Hurth & PRM (10 Teeth Spline / 241.3mm OD)
Part No: RND-23D40
23D40 R & D Marine Gearbox Damper Drive PlateFitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing... Read more
23D40 R & D Marine Gearbox Damper Drive Plate
Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.
Also called the Driven Plate, Damper Plate or Clutch Plate, the 23D40 Damper Drive Plate is from the R and D hammer head element range. Common applications for the 23D40 drive plate include marine engines with SAE 7.5" (7½) flywheel fixings.
Marine damper plate technical details:
- Spline: 10 teeth B10 x 23 x29 DIN 5464 (29mm diameter) for ZF 5, 10, 12 and Hurth 10, 12, 35, 50, 100, 125 & 150 gearboxes, PRM 80, 120 & 150 gearboxes, Technodrive TMC 30, 40, 50 & 60 and Borgwarner 500 boxes.
- Diameter of back plate which bolts to the engine flywheel: 241.3mm (9.5") SAE 7½"
- Back plate fixing holes: One single set of fixing holes 8 x 10.6mm on 222.25mm pcd SAE 11.5
- Drive plate maximum thickness: 35mm (1.38")
Fitted with the multi-directional 'D' Hammer Head element for up to 160Nm 215 ft lb torque, providing a smaller element diameter which has greater torsional flexibility than the loop type elements and provides three stage stiffness with up to 9 degrees of deflection. The 23D40 damper drive plate is also failsafe.
If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.
| Application | PRM 80, 90, 120, 125 & 150 gearbox, ZF 10 & 12 gearbox, Hurth HBW 5, 10, 15, 50 & 125 gearboxes, Technodrive TMC 30, 40, 50 & 60 gearboxes & Borgwarner 500. |
| Type | 10 Tooth Plates |
| Brand | R&D Marine |
| Country of Origin | United Kingdom |
| Element | Hammer Head |
| Bolt Hole PCD Description | 8 x 10.6mm on 222.25mm PCD. |
| Diameter Description | OD: 241.3mm (9.5") |
| Gearbox Spline | 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter) |
| Number of Fixing Holes | 8 |
| Thickness | Maximum: 35mm (1.38") |
| Torque | 160 Nm, 215 lbft |
£209.02
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
