R&D Drive Plate For PRM (10 Teeth Spline, 362mm OD, 310 lb ft Torque)
Part No: RND-16L2
16L2 R & D Marine Damper Drive PlateFitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted... Read more
16L2 R & D Marine Damper Drive Plate
Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.
Also called the Driven Plate, Damper Plate or Clutch Plate, the 16L2 Damper Drive Plate is from the R and D hammer head element range. Common applications for the 16L2 drive plate include 4 and 6 cylinder Ford engines mated to PRM175, PRM250, PRM265 and PRM310 gearboxes.
16L2 boat drive plate technical details:
- Spline: 10 teeth SAE 1-1/8" x 10 T (28.6mm diameter) (PRM 175, 250, 265 & 310 gearboxes)
- Diameter of back plate which bolts to the engine flywheel: 362mm (14.25")
- Back plate fixing holes: Multi-punched 6 x 8.1, on 200mm, 6 x 8.1mm on 210mm, 6 x 8.1mm on 263mm, 6 x 8.1mm on 269.9mm, 6 x 8.1mm on 276.3mm, 8 x 8.1mm on 289mm, 6 x 8.1mm on 295.3mm, 6 x 8.8mm on 304.8mm, 6 x 8.1mm on 314.4mm, 6 x 9.5mm on 320.7mm, 12 x 9.5mm on 343mm
- Drive plate maximum thickness: 35mm (1.38")
Fitted with the multi-directional 'L' Hammer Head element for 420Nm 310 ft lb torque, providing a smaller element diameter which is more torsionally flexible than the loop type elements and provides three stage stiffness with up to 9 degrees of deflection. The 16L2 damper drive plate is also failsafe.
If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.
| Application | PRM Gearboxes: 175, 250, 265 & 310. |
| Type | 10 Tooth Plates |
| Brand | R&D Marine |
| Country of Origin | United Kingdom |
| Element | Hammer Head |
| Bolt Hole PCD Description | 12 x 8.1mm holes on 222.3mm PCD, 6 x 8.1mm holes on 244.5mm PCD Spaced 3 groups of 2 apart 23°59'07, 12 8.1mm holes on 246mm PCD, 12 x 8.1mm holes on 242mm PCD. |
| Diameter Description | OD: 266.7mm (10-1/2") |
| Gearbox Spline | 10 teeth SAE 1 1/8" x 10T (28.6mm diameter) |
| Number of Fixing Holes | 6 Spaced in three groups of two, 12 |
| Thickness | Maximum: 35mm (1.38") |
| Torque | 215 Nm, 160 lbft |
£218.63
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
