We use cookies - Find out more
Telephone: 01502 716993
Part Identifier ?
FireAngel CO-9X Carbon Monoxide Detector & Alarm
FireAngel Logo

FireAngel CO-9X Carbon Monoxide Alarm

Part No. 715541

£29.60 You pay £29.60 Incl VAT You pay £24.67 Excl VAT

RRP £32.89 £27.41

Save £3.29 (10.0%) Save £2.74 (10.0%)


Add to Wishlist
Brand FireAngel
Warranty (Years) 7
Voltage DC
Certification / Approvals Meets BSS (Boat Safety Scheme) Requirements. Conforms to BS EN 50291-1: 2010, EN 50291-2: 2010, CE.
Operating Temperature -10°C to 40°C (14°F to 104°F). Operating Humidity: 30% to 90% RH non-condensing.
Mounting Wall Mount, Ceiling Mount or Shelf Mount.
Dimensions Height: 72mm, Width: 112mm, Depth: 35mm

The FireAngel CO-9X carbon monoxide detector and alarm features three LED status indicators to show when the carbon monoxide detector unit has power, has entered fault mode or alarm mode. The detector is designed so that it can be wall mounted, ceiling mounted or left free standing for home or travel use. This carbon monoxide alarm has a non-removable sealed battery pack with a 7 year life (in normal operating conditions) to detect poisonous carbon monoxide gas.

The FireAngel CO detector features an advanced electrochemical sensor designed to accurately measure low levels of CO, once carbon monoxide has been detected the FireAngel CO-9X will emit a loud 85dB alarm (at 1 metre) and red flashing LED when carbon monoxide is present. The CO-9X alarm is suitable for boats, caravans and domestic use.

Important Note: As of 1st April 2019 a carbon monoxide alarm is required on all boats in scope of the Boat Safety Scheme (BSS) requirements that have accommodation spaces.

To have protection from the risk of outside sources of CO and to comply with the BSS Requirements, any boat that has accommodation space will need to have at least one CO alarm, i.e. a cabin or other space surrounded by permanent boat structure and if that space is used for sleeping, cooking, eating, washing or steering.


How To Install Your Detector

Note: This alarm should be installed by a competent person who feels able to install it according to the instructions.

Firstly write the installation date on your detector in the area provided. We recommend that your detector is installed on the wall.

To mount on a wall or ceiling: Please ensure that you use the screws provided, as they were chosen specifically for use with this product. Use the template provided for guidance on marking hole positions. Drill holes into the wall. Insert the plastic wall plugs. Screw in the screws. Ensure screws are protruding from the wall by 3mm to allow detector to slot onto screws.

To place on a shelf: The base of the detector has been designed to allow it to stand freely on a shelf.

You may also need

FAQ & Technical Information

This product has been added to your basket.