We use cookies - Find out more
Telephone: +441502 716993
Part Identifier ?
ZF Hurth Logo

ZF10M Gearbox (RH / Ahead 2.05:1 Astern 1.86:1)

Part No. ZF10M-2R

This gearbox has been discontinued by the manufacturer.

0 reviews
Brand ZF Hurth
Gearbox Manufacturer ZF Hurth
Hydraulic or Mechanical Mechanical
Gearbox Model ZF 10M
Ratio Ahead / Stern 2.05:1 ahead, 1.86:1 astern
Shaft Arrangement Drop Centre
Nominal Power Rating Pleasure 45hp, 34kW.
Approximate Dry Weight 10.4kg

The ZF10M-2R is a new gearbox and will replace the Hurth HBW100 gearbox, however this will require a new drive plate due to a difference in the shaft diameters of the two gearboxes. This means they will need a new drive plate. This gearbox includes a control cable connection bracket kit.

The ZF10M is a mechanically operated, vertical offset, direct mount, reverse reduction marine transmission.
Maximum rated input 34kW (45hp).
Fitted with mechanically actuated multi-disc clutches.
Standard ratios: Ahead 2.05:1 (RH) Astern 1.86:1

PLEASE NOTE: We only offer the ZF ZF10M-2R gearbox for replacement applications. The ZF10M-2R will replace the Hurth HBW100-2R marine gearbox. For new installation, please consider the PRM 90 gearbox.

Can I replace by ZF10M gearbox or HBW100 gearbox with a PRM 90 gearbox? There are some differences:

Gearbox drop centre distance: ZF10M-2R 62mm | PRM90 72mm
Overall length from adaptor plate face to output coupling: ZF10M-2R 195mm | PRM90 212mm
Operating lever position viewed from the output coupling: ZF10M right hand side | PRM90 left hand side
Ratios: ZF10M-2R ahead 2.05:1, astern 1.86:1 | PRM 90 ahead 2.04:1 astern 2.5:1
The ZF adaptor plates, drive plates and output couplings should all be the same (HBW adaptor may differ).

Please contact our sales department for a full technical spec sheet and application advice.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...