We use cookies - Find out more
Telephone: +441502 716993
Part Identifier ?
R&D Marine Logo

R&D Drive Plate (10 Teeth Spline, PRM ZF Hurth, 155mm OD, 100 lb ft)

Part No. RND-22B4

€81.84 You pay €81.84 Incl VAT You pay €68.20 Excl VAT

RRP €88.47 €73.72

Save €6.63 (7.5%) Save €5.52 (7.5%)


0 reviews
Add to Wishlist
Brand R&D Marine
Country of Origin United Kingdom
Element Loop
Gearbox Model Borgwarner 500, PRM 80, PRM 90, PRM 120, PRM 125, PRM 500, TMC 30, TMC 40, TMC 50, TMC 60, ZF 10, ZF 12, ZF Hurth HBW 5, ZF Hurth HBW 10, ZF Hurth HBW 15, ZF Hurth HBW 50, ZF Hurth HBW 125
Suitability PRM 80, 90, 120, 125 & 500 gearbox, ZF 10 & 12 gearbox, Hurth HBW 5, 10, 15, 50 & 125 gearboxes, Technodrive TMC 30, 40, 50 & 60 gearboxes & Borgwarner 500.
Gearbox Spline 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter)
Diameter OD: 155.45mm (6.125")
Torque 135 Nm, 100 lbft
Bolt Hole PCD (Pitch Circle Diameter) 5 x 6.35mm holes (0.25") on 142mm PCD (5.593).
Number of Fixing Holes 5
Thickness Maximum: 32mm (1.25")
Replaces PRM Drive Plate MT8112

22B4 Marine Engine Damper Drive Plate from R&D Marine

Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 22B4 Damper Drive Plate is from the R and D Loop element range. Common applications for the 22B4 drive plate include BMC, Ford and Perkins engines which have a flywheel with the 6.125" diameter fixings aperture. It can be used to replace PRM drive plate MT8112.

The technical details:
Spline: 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter) for PRM 80, 120 & 150 gearboxes, Hurth ZF & HBW, Technodrive TMC 30, 40, 50, 60 gearboxes and the Borgwarner 500.
Diameter of drive plate back plate which bolts to the engine flywheel: 155.45 mm 6.125"
Back plate fixing holes: The small back plate has 5 x 6.35mm holes (0.25") on 142mm PCD (5.593). This was a very common fixing arrangement for BMC, Leyland, Thornycroft and Perkins engines
Drive plate maximum thickness: 32mm (1.25")
Fitted with a type B loop element for 135Nm 100 ftlb torque, which can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...