We use cookies - Find out more
Telephone: +44 (0)1502 716993
Part Identifier ?
Pilot Logo

Pilot Gas Alarm With Two Detector Heads (Shutdown Solenoid / 12V)

Part No. 715505

€298.74 You pay €298.74 Incl VAT You pay €248.95 Excl VAT

RRP €331.95 €276.62

Save €33.21 (10.0%) Save €27.67 (10.0%)
0 reviews


Add to Wishlist
Brand Pilot
Country of Origin United Kingdom
Voltage 12V DC
Thread Size 1/4" BSP Female
Length 3.5 Metres of Connection Cable per Head
Dimensions 35mm x 65mm x 120mm

Pilot gas monitoring system is a combination of the twin gas alarm and the gas valve controller. It combines the ability to detect a gas leak with a shutdown solenoid to be able to remotely turn off the gas when a leak is detected.

A Pilot twin channel gas alarm is an important and cost effective item of safety equipment wherever gas or other dangerous vapours may be present in the environment.

However good a gas or engine installation may be there can be occasions when either a due to mechanical failure or human error, a potentially lethal leak may occur. Many of the vapours present on boats and in caravans such as butane, propane and petrol are heavier than air, meaning even a small leak can soon build up to dangerous proportions in the bilge of a boat or in an inadequately ventilated caravan.

Pilot gas alarms are not fitted with an on / off switch as they are designed to be permanently on whenever the master switch is activated. The Pilot gas alarm also has a built in test feature to ensure the system works correctly. It also features a manual on/off switch for the gas on board your boat. The Pilot twin channel gas alarm control box is supplied complete with two detector heads with 3.5 metres of cable per detector head plus installation and operating instructions.

The Pilot gas alarm requires a 12V DC power supply and consumes 170 milliamps standby, 210 milliamps with both alarms sensing and 470 milliamps with gas switch open. An internal fuse protects the gas alarm circuit and sophisticated fault detection circuitry warns of low supply voltage, detector failure, disconnection or short circuit.

This extra terminal in the Pilot twin gas alarm can alternatively be used as a network terminal to allow any number of twin alarms to be 'chained' together. This is particularly useful on larger vessels as it allows you to have a main control unit and at least one detector in most rooms, yet if the unit at the other end of the vessel alarms, all the units will activate. The unit that detected the original leak will be identifiable by a bright LED.

You may also need

Customer Reviews

Add a review

This product has not yet had a review.

This product has been added to your basket.