We use cookies - Find out more
Telephone: +441502 716993
Part Identifier ?
ASAP Electrical Level Sender 55cm for Water
ASAP Electrical Logo

ASAP Electrical 55cm Tank Level Senders for Waste Water & Fresh Water

Part No. 704655

€76.33 You pay €76.33 Incl VAT You pay €63.61 Excl VAT

RRP €84.81 €70.68

Save €8.48 (10.0%) Save €7.07 (10.0%)


0 reviews
Add to Wishlist
Brand ASAP Electrical
Gauge/Sender Resistance American, European
Voltage 12V & 24V DC
Amps 20mA Maximum Current
Number of Stations Single Station (Works one gauge)
Suitability Drinking Water and Waste Water
Length 550mm
Height Cap: 57mm
Diameter 5 Hole Fixing Flange 54mm PCD
Notes Recommended distance from bottom of tank 2cm
Operating Temperature 0°C to 60°C

This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below.

These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender.

When Height is less than 30cm : 1cm.
When Height is between 30cm and 60cm : 2cm.
When height is greater than 60cm : 3cm.

  • Resistance: 3-180 ohms (European) or 240-33 ohms (American)

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...