We use cookies - Find out more
Telephone: 01502 716993
Part Identifier ?
R&D Marine Logo

R&D Drive Plate For PRM Delta (17 Teeth Spline / 266.7mm Diameter)

Part No. RND-12B37

£109.28 You pay £109.28 Incl VAT You pay £91.07 Excl VAT

RRP £118.14 £98.45

Save £8.86 (7.5%) Save £7.38 (7.5%)


Add to Wishlist
Brand R&D Marine
Country of Origin United Kingdom
Element Loop
Gearbox Model PRM Delta
Suitability PRM Delta gearbox.
Gearbox Spline 17 teeth 24/48 DP (19.7mm diameter)
Diameter OD: 266.7mm (10.5")
Torque 135 Nm, 100 lbft
Bolt Hole PCD (Pitch Circle Diameter) 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23°59'07, 12 x 8.1 on 246mm PCD & 12 x 8.1 on 242mm PCD.
Number of Fixing Holes 6 Spaced in three groups of two, 12
Thickness Maximum: 32mm (1.25")

12B37 R & D Marine Engine Damper Drive Plate

Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 12B37 Damper Drive Plate is from the R and D range. Common applications for this drive plate include Thornycroft 80, Mitsubishi and low output Ford XLD based marine engines.

The technical details:
Spline: 17 teeth 24/48 DP (19.7mm diameter) for the PRM Delta gearbox depending on the application.
Diameter of drive plate back plate which bolts to the engine flywheel: 266.7 mm 10.5"
Back plate fixing holes: This is a multi-punched drive plate back plate offering the following fixing holes: 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23°59'07, 12 x 8.1 on 246mm PCD and 12 x 8.1 on 242mm PCD
Drive plate maximum thickness: 32mm (1.25")
Fitted with a type B loop element for 135Nm 100 ft lb torque, which can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe.

If you are unsure or need any assistance choosing your drive plate please contact our customer support department who will help you find the right parts for your application.

You may also need

This product has been added to your basket.