We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 10 Teeth Spline | PRM | 155.45mm Diameter | 180 lb ft Torque

Part No. RND-14E4

93.8 You pay £112.56 Incl VAT You pay £93.80 Excl VAT

RRP £121.68 £101.40

Save £9.12 (7.5%) Save £7.60 (7.5%)

BACKORDER ?

0 reviews

Add to Wishlist
Overview
Brand R&D Marine
Country of Origin United Kingdom
Element Loop
Suitability PRM Gearboxes: 101, PRM 160 & 260.
Gearbox Spline 10 teeth SAE 1" x 10T (25.4mm diameter)
Diameter OD: 155.45mm (6.125")
Torque 245 Nm, 180 lbft
Bolt Hole PCD (Pitch Circle Diameter) 5 x 6.35mm holes (0.25") on 142mm PCD (5.593).
Number of Fixing Holes 5
Thickness Maximum: 35mm (1.38")
Description

14E4 Boat Engine Damper Drive Plate from R&D Marine

Fitted between the marine engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 14E4 Damper Drive Plate is from the R and D Loop element range. Common applications for the 14E4 drive plate include BMC, Ford and Perkins engines which have a flywheel with the 6.125" diameter fixings aperture.

The technical details:
Spline: 10 teeth SAE 1" x 10T (25.4mm diameter) for PRM 101, PRM 160 and PRM 260 gearboxes.
Diameter of drive plate back plate which bolts to the engine flywheel: 155.45 mm 6.125"
Back plate fixing holes: The small back plate has 5 x 6.35mm holes (0.25") on 142mm PCD (5.593). This was a very common fixing arrangement for BMC, Leyland, Thornycroft and Perkins engines
Drive plate maximum thickness: 35mm (1.38")
Fitted with a type E loop element for 245Nm 180 ft lb torque this element does extend over the drive plate back plate, so please check carefully if space is limited. The 14E4 drive plate can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...