We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier
Sherwood Pump Impeller 22000K for 15/16" Shaft

Sherwood 22000K Flexible 10 Vane Neoprene Impeller Kit (Threaded / Splined)

Part No. SW22000K

285.75 You pay €401.20 Incl VAT You pay €334.33 Excl VAT

RRP €445.77 €371.48

Save €44.57 (10.0%) Save €37.15 (10.0%)

IN STOCK

0 reviews
Add to Wishlist
Overview
Brand Sherwood
Model 22000K
Suitability Sherwood G2201-01 & G22011-01 Used in Caterpillar 3412 Engines
Construction Neoprene with threaded insert
Depth 110mm (4-5/16")
Diameter 114mm (4-1/2"), Shaft 23.8mm (15/16")
Drive Type Spline Drive. 14 Tooth (30°)
Number of Impeller Blades 10
Impeller Shaft Diameter 23.8mm
Replaces Caterpillar 147-7850 & 212-7264
Description

Sherwood marine raw water pumps all feature a flexible neoprene impeller which attaches to the shaft. The shaft rotation powers the impeller which transfers the water by creating a vacuum on the inlet side and then forcing water out in a uniform flow on the outlet side. As such an important component, you should ensure that your pump impeller is always in top condition and that you always use the correct impeller for your application. This will help to ensure the best engine performance and prolong engine life.

Sherwood recommend that all impellers are replaced at least annually (depending on application) to maintain impeller performance, however it is good practice to inspect them often to check for excessive abrasions or damage. It is also recommended that during long periods of being unused, impellers should be removed from the pump housing to prevent ultraviolet deterioration, vanes setting into position and copper bonding of the impeller to the housing. Any issues with your impeller can lead to engine overheating, which is the main reason for premature engine wear.

This genuine Sherwood impeller is the 22000K model and is supplied complete with an O-ring and a technical guide. It has 10 vanes and features a threaded/splined keyway, meaning it can be removed with an impeller puller. The neoprene impeller is designed to fit on a 15/16" pump shaft and should only be used to pump water.

This impeller is replaced by Sherwood 30000K impeller on the later Sherwood pumps with new shaft and seal modification.

This 22000K impeller is suitable for use in the following pumps:

Sherwood G2201-01 & G22011-01 used in Caterpillar 3412 engines (Caterpillar 147-7850 & 212-7264).

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...