We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

Rule LoPro LP900D Submersible Bilge Pump (12V / 56lpm / 19mm, 25mm or 28mm Hose)

Part No. 504164

32.81 You pay €46.46 Incl VAT You pay €38.72 Excl VAT

RRP €51.61 €43.01

Save €5.15 (10.0%) Save €4.29 (10.0%)

IN STOCK

0 reviews
Add to Wishlist
Overview
Brand Rule
Series LoPro
Model LP900D
Voltage 12V DC
Fuse 7.5A
Amps 4A
Flow Rate at Zero Head 56 litres/minute (12.5 gallons/minute)
Maximum Recommended Head
Outlet For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") ID Hose
Length 193mm (7.6")
Width 56mm (2.3") Minimum
Height 56mm (2.3"), Switch cut in height: 38mm (1.5")
Ignition Protected Yes
Notes The entire pump body swivels up to 180°, making the pump extremely easy to install
Description

The LoPro brings Rule pumping power to tight spaces. The LP900D submersible bilge pump features a fully rotating discharge body for installation flexibility, allowing horizontal or vertical mounting. The Rule LoPro pump is supplied with a choice of different sized discharge ports for 19mm (3/4"), 25mm (1") or 28mm (1-1/8") bore hose.

Rule LoPro pumps also feature a non-return valve in the straight outlets to stop any water running back down into the pump, although this is not in the elbows to avoid a reduction in flow rate. The non-return valve will prevent any water running back down the pipes into the pump, which would then require pumping out again.

For automatic operation please use Rule float switches.

The LoPro bilge pump should only be used in the bilges of leisure craft, if used as a sole or primary bilge pump it is only suitable for vessels up to 24 metres (78.8ft).


You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...