We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 10 Teeth Spline | PRM | 235mm Diameter

Part No. RND-14E9

130.47 You pay €175.36 Incl VAT You pay €146.13 Excl VAT

RRP €189.57 €157.98

Save €14.21 (7.5%) Save €11.85 (7.5%)


0 reviews

Add to Wishlist
Brand R&D Marine
Element Loop
Suitability PRM Gearboxes: 100, 101, 140, 160 & 260.
Gearbox Spline 10 teeth SAE 1" x 10T (25.4mm diameter)
Diameter OD: 235mm (9.249" / 9.251")
Torque 245 Nm, 180 lbft
Bolt Hole PCD (Pitch Circle Diameter) 6 x 0.32" bolt holes on 218mm (8.583") PCD
Number of Fixing Holes 6
Thickness Maximum: 35mm (1.38")

14E9 Boat Engine Damper Drive Plate from R&D Marine

Fitted between the marine engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 14E9 Damper Drive Plate is from the R and D Loop element range. Common applications for the 14E9 include the Mercedes OM636 engine with a PRM gearbox fitted.

The technical details:
Spline: 10 teeth SAE 1" x 10T (25.4mm diameter) for PRM 100 & 140, PRM 101 & 160 and PRM 260 gearboxes.
Diameter of drive plate back plate which bolts to the engine flywheel: 235mm (9.249" / 9.251")
Back plate fixing holes: The small back plate has 6 x 0.32" bolt holes on 218mm (8.583") PCD for the OM636
Drive plate maximum thickness: 35mm (1.38")
Fitted with a type E loop element for 245Nm 180 ft lb torque the 14E9 drive plate can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...