We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 17 Teeth Spline | PRM | 393.7mm Diameter

Part No. RND-18M44

136.04 You pay €182.83 Incl VAT You pay €152.36 Excl VAT

RRP €197.66 €164.72

Save €14.83 (7.5%) Save €12.36 (7.5%)


0 reviews

Add to Wishlist
Brand R&D Marine
Element Loop
Suitability PRM Gearboxes: 301, 302, 401, 402, 500 & 750.
Gearbox Spline 17 teeth 16/32 DP (28.84mm diameter)
Diameter OD: 393.7mm (15.5")
Torque 540 Nm, 400 lbft
Bolt Hole PCD (Pitch Circle Diameter) 12 x 9.525mm (3/8") holes on 368.3mm (14.5") PCD.
Number of Fixing Holes 12
Thickness Maximum: 35mm (1.38")

18M44 R & D Marine Engine Damper Drive Plate

Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 18M44 Damper Drive Plate is from the R and D Loop element range. Common applications for the 18M44 drive plate include the Ford BSD engines.

The technical details:
Spline: 17 teeth 16/32 DP (28.84mm diameter) for PRM 301, 302, 401, 402, 500 and 750 gearboxes.
Diameter of drive plate back plate which bolts to the engine flywheel: 393.7mm 15.5"
Back plate fixing holes: One single set of fixing holes offering 12 x 3/8" holes on 14.5" PCD
Drive plate maximum thickness: 35mm (1.38")
Fitted with a type M loop element for 540 Nm 400 ft lb torque, the 18M44 drive plate can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...