We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier
R and D Marine PRM Damper Drive Plate 45AG69

R&D Drive Plate | 10 Teeth Spline | PRM | 287.4mm Diameter | 200 lb ft Torque

Part No. RND-45AG69


You pay €146.96 Incl VAT You pay €122.47 Excl VAT

Normally €180.74 Normally €150.62

RRP €195.40 €162.83

Save €48.44 (24.8%) Save €40.36 (24.8%)


0 reviews
Add to Wishlist
Brand R&D Marine
Element High Deflection
Suitability PRM Gearboxes: 100, 101, 140, 160 & 260.
Gearbox Spline 10 teeth SAE 1" x 10T (25.4mm diameter)
Diameter OD: 287.4mm (11.312")
Torque 270 Nm, 200 lbft
Bolt Hole PCD (Pitch Circle Diameter) 6 x 9.1 on 269.96mm PCD & 6 x 6.3mm on 269.96mm PCD.
Number of Fixing Holes 6
Thickness Maximum: 35mm (1.38")

PRM Part Number: 45AG69

The R & D Marine gearbox damper drive plate is fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D damper drive plates include a 'failsafe' design.

Also called the driven plate, damper plate, gearbox drive plate or clutch plate, the 45AG69 damper drive plate is from the R and D high deflection element range.

Common applications for the 45AG69 gearbox drive plate include Trans Auto & TAMD 40 engines mated to gearbox models PRM160 & PRM260, subject to flywheel dimensions and engine power. The 45AG69 is a replacement for the 45AG94

R & D damper drive plate technical details:

  • Spline: SAE 1" x 10 teeth (25.4mm diameter) for PRM100, 101, 140, 160 & 260 gearboxes
  • Diameter of back plate which bolts to the engine flywheel: 287.4mm 11.312" (nominal)
  • Back plate fixing holes: (multi-hole fixing type): 6 x 9.1 on 269.96mm pcd and 6 x 6.3mm on 269.96mm PCD.
  • Maximum thickness of drive plate: 35mm (1.38")
  • Fitted with the softer type AG high deflection element for 270Nm 200 ftlb torque, providing a maximum deflection up to 30 degrees.
  • This type of drive plate is especially suited to workboats with slow speed applications and pleasure boats.

Please Note: that this type of damper drive plate can only be fitted to rotate in the standard direction of rotation (anti-clockwise when looking at the flywheel) with the drive plate element facing the gearbox. The 45AG69 damper plate is also failsafe.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...