We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier
ASAP Electrical Level Sender 20cm for Water

ASAP Electrical 20cm Tank Level Senders for Waste Water & Fresh Water

Part No. 704620

47.93 You pay €64.42 Incl VAT You pay €53.68 Excl VAT

RRP €71.57 €59.64

Save €7.15 (10.0%) Save €5.96 (10.0%)


0 reviews
Add to Wishlist
Brand ASAP Electrical
Gauge/Sender Resistance American, European
Voltage 12V & 24V DC
Amps 20mA maximum current
Number of Stations Single Station (Works one gauge)
Suitability Drinking Water and Waste Water
Length 200mm
Height Cap is 57mm
Diameter 5 Hole Fixing Flange 54mm PCD
Notes Recommended distance from bottom of tank: when height is < 30cm: 1cm, when height is 30cm to 60cm: 2cm, when height is > 60cm: 3cm.
Operating Temperature 0°C to 60°C
Replaces Closest Alternative for Level Senders: 704619 (19cm), 704622 (22cm)

This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. Resistance: 3-180 ohms (European) or 240-33 ohms (American).

These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...