We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 26 Teeth Spline | Borgwarner | 362mm Diameter | 250 lb ft Torque

Part No. RND-3G2

120.01 You pay €168.49 Incl VAT You pay €140.41 Excl VAT

RRP €182.16 €151.80

Save €13.67 (7.5%) Save €11.39 (7.5%)

BACKORDER ?

0 reviews

Add to Wishlist
Overview
Brand R&D Marine
Element Loop
Suitability Borgwarner 70, 71 & 72 Velvet Drive gearboxes, Hurth HSW & HBW 250, ZF IRM220A, Paragon P series, Technodrive TM 93, 170, 260, 345, 485, 545 & 880 gearboxes, Twin Disc 501 & 502, TMP 1200 & 1500 gearboxes, PRM inline gearboxes & some later Volvo saildrive
Gearbox Spline 26 teeth 20/40 DP (35.4mm diameter)
Diameter OD: 362mm (14.25")
Torque 340 Nm, 250 lbft
Bolt Hole PCD (Pitch Circle Diameter) 6 x 8.1mm on 200mm pcd, 6 x 8.1mm on 210mm pcd, 6 x 8.1mm on 263mm pcd, 6 x 8.1mm on 269.9mm pcd, 6 x 8.1mm on 276.3mm pcd, 6 x 8.1mm on 289mm pcd, 6 x 8.1mm on 295.3mm pcd, 6 x 8.8mm on 304.8mm pcd, 6 x 8.1mm on 314.4mm pcd, 6 x 9.5mm on 320.7mm pcd, 12
Number of Fixing Holes 6, 12
Thickness Maximum: 35mm (1.38")
Description

3G2 Boat Engine Damper Drive Plate from R&D Marine

Fitted between the marine engine and the Borgwarner gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, this Damper Drive Plate is from the R and D range. Common applications for the 3G2 drive plate include Ford Dorset & Dover 2700, 2710 & 2720 based engines.

The technical details:
Spline: 26 teeth 20/40 DP (35.4mm diameter) for Borgwarner 70, 71 & 72 Velvet Drive gearboxes, Hurth HSW and HBW250, ZF IRM220A, Paragon P series, Technodrive TM 93, 170, 260, 345, 485, 545 & 880 gearboxes, Twin Disc 501 & 502, TMP 1200 & 1500 gearboxes, PRM inline gearboxes and some later Volvo saildrives.
Diameter of back plate which bolts to the engine flywheel: 362mm 14.25"
Back plate fixing holes: 6 x 8.1 on 200mm pcd, 6 x 8.1 on 210mm pcd,6 x 8.1 on 263mm pcd, 6 x 8.1 on 269.9mm pcd, 6 x 8.1 on 276.3mm pcd, 6 x 8.1 on 289mm pcd, 6 x 8.1 on 295.3mm pcd, 6 x 8.8 on 304.8mm pcd, 6 x 8.1 on 314.4mm pcd, 6 x 9.5 on 320.7mm pcd, 12 x 9.5 on 343mm pcd.
Maximum thickness of drive plate: 35mm (1.38")
Fitted with the robust type G loop element for 340Nm 250 ftlb torque, which can be mounted either round on the flywheel and rotated in either direction. The 3G2 drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...