We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 17 Teeth Spline | PRM | 266.7mm Diameter | 100 lb ft Torque

Part No. RND-12AM37

97.08 You pay €137.46 Incl VAT You pay €114.55 Excl VAT

RRP €148.61 €123.84

Save €11.15 (7.5%) Save €9.29 (7.5%)

BACKORDER ?

0 reviews

Add to Wishlist
Overview
Brand R&D Marine
Country of Origin United Kingdom
Element High Deflection
Suitability Newage PRM Delta gearbox.
Gearbox Spline 17 teeth 24/4 8DP (19.7mm diameter)
Diameter OD: 266.7mm (10.5")
Torque 135 Nm, 100 lbft
Bolt Hole PCD (Pitch Circle Diameter) 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23°59'07, 12 x 8.1 on 246mm PCD & 12 x 8.1 on 242mm PCD
Number of Fixing Holes 6 Spaced in three groups of two, 12
Thickness Maximum: 32mm (1.25")
Replaces R&D 12AA37
Description

12AM37 R & D Marine Engine Damper Drive Plate

Fitted between the boat engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 12AM37 Damper Drive Plate is from the R and D High Deflection element range. Common applications for the 12AM37 drive plate include Ford or Mitsubishi engines mated to a PRM Delta gearbox subject to flywheel dimensions.

The technical details:
Spline: 17 teeth 24/48DP (19.7mm diameter) for Newage PRM Delta gearbox.
Diameter of drive plate back plate which bolts to the engine flywheel: 266.7 mm 10.5"
Back plate fixing holes: This is a multi-punched drive plate back plate offering the following fixing holes: 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23°59'07, 12 x 8.1 on 246mm PCD and 12 x 8.1 on 242mm PCD
Drive plate maximum thickness: 32mm (1.25")
Fitted with the softer type AM high deflection element for 135Nm 100 ft lb torque, providing a maximum deflection up to 30 degrees. This type of drive plate is especially suited to workboats with slow speed applications & pleasure boats. Note that this type of damper drive plate can only be fitted to rotate in the standard direction of rotation (anti-clockwise when looking at the flywheel) with the drive plate element facing the gearbox. These damper plates are also failsafe.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...