We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

ASAP Electrical Panel Mounted Circuit Breaker with 80A Rating

Part No. 711593

16.37 You pay €23.18 Incl VAT You pay €19.32 Excl VAT

RRP €25.76 €21.46

Save €2.58 (10.0%) Save €2.14 (10.0%)

IN STOCK

0 reviews
Add to Wishlist
Overview
Brand ASAP Electrical
Amps 80A
Voltage 48V DC
Protection Rating IP67
Operating Temperature -32°C to +82°C
Stud Size 1/4"
Certification / Approvals SAE J1171 (ignition protected), SAE J1625, CE
Description

ASAP Electrical circuit breaker suitable for marine and automotive environments in auxiliary and accessory circuits. The circuit breaker is sealed and waterproof so is suitable for use in engine compartments and bilge areas. The circuit breaker will break the circuit at 80 amps and there is a switch on the circuit breaker to easily reconnect the circuit.

This is a single pole, ignition protected circuit breaker, which is designed to be mounted in a panel. It is constructed from black UL-rated 94V0 thermoset plastic and features 1/4" studs.

FAQ's

  • What does an IP rating mean? +

    The IP rating of a product is a unit of scale used to classify solid particle and liquid ingress protection, by using a two number system. The meaning of each number is listed in the below table:

    First Digit
    Number Protection
    0 No protection against contact and ingress of objects
    1 Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part
    2 Fingers or similar objects
    3 Tools, thick wires, etc.
    4 Most wires, screws, etc.
    5 Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact (dust proof)
    6 No ingress of dust; complete protection against contact (dust tight)

     

    Second Digit
    Number Protection
    0 No protection
    1 Dripping water (vertically falling drops) shall have no harmful effect.
    2 Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position
    3 Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.
    4 Water splashing against the enclosure from any direction shall have no harmful effect.
    5 Water projected by a nozzle (6.3mm) against enclosure from any direction shall have no harmful effects.
    6 Water projected in powerful jets (12.5mm nozzle) against the enclosure from any direction shall have no harmful effects.
    6K Water projected in powerful jets (6.3mm nozzle) against the enclosure from any direction, under elevated pressure, shall have no harmful effects.
    7 Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1m of submersion).
    8 The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.
    9K Protected against close-range high pressure, high temperature spray downs.

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...