We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 10 Teeth Spline | PRM, ZF, TMC | 241mm Diameter

Part No. RND-43AN49

130.34 You pay £156.41 Incl VAT You pay £130.34 Excl VAT

RRP £169.09 £140.91

Save £12.68 (7.5%) Save £10.57 (7.5%)


0 reviews

Add to Wishlist
Brand R&D Marine
Element High Deflection
Suitability PRM Gearboxes: 80, 120, 150, 30, 40, 50, 60, Borgwarner 500, HBW 5, HBW 35, HBW 50, HBW 100, ZF5 or ZF 10 gearboxes.
Gearbox Spline 10 teeth B10 x 23 x 29 DIN5464 (29mm diameter)
Diameter OD: 241.3mm (9.50")
Torque 270 Nm, 200 lbft
Bolt Hole PCD (Pitch Circle Diameter) 8 x 8.5mm on 222.25mm PCD
Number of Fixing Holes 8
Thickness Maximum: 35mm (1.38")
Replaces R&D 43AG49

43AN49 R & D Marine Damper Drive Plate (was 43AG49)

Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 43AN49 Damper Drive Plate is from the R and D High Deflection element range. Common applications for the 43AN49 drive plate include SAE 7.5 flywheels mated to PRM80, PRM120, PRM150, TMC30, TMC40, TMC50, TMC60, Borgwarner 500, HBW5, HBW35, HBW50, HBW100, ZF5 or ZF 10 gearboxes.

The technical details:
Spline: 10 teeth B10 x 23 x 29 DIN5464 (29mm diameter) for PRM, ZF, Hurth, Technodrive, Borgwarner 500, TMP gearboxes
Diameter of back plate which bolts to the engine flywheel: 241.3mm 9.50"
Back plate fixing holes: 8 x 8.5mm on 222.25mm pcd SAE7 1/2
Maximum thickness of drive plate: 35mm (1.38")
Fitted with the softer type AG high deflection element for 270Nm 200 ftlb torque, providing a maximum deflection up to 30 degrees. This type of plate is especially suited to workboats with slow speed applications & pleasure boats. Note that this type of damper drive plate can only be fitted to rotate in the standard direction of rotation (anti-clockwise when looking at the flywheel) with the element facing the gearbox. These damper plates are also failsafe.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

This product has been added to your basket.
Loading   Loading...