We use cookies - Find out more
Telephone: +441502 716993
? Part Identifier

R&D Drive Plate | 10 Teeth Spline | ZF Hurth PRM | 266.7mm Diameter

Part No. RND-22B37

80.97 You pay £97.16 Incl VAT You pay £80.97 Excl VAT

RRP £105.04 £87.53

Save £7.88 (7.5%) Save £6.56 (7.5%)

IN STOCK

0 reviews
Add to Wishlist
Overview
Brand R&D Marine
Element Loop
Suitability Hurth HBW 5, 10, 50, 100 & 125 gearboxes, ZF10, 12 gearboxes, PRM 80, 120 & 150 gearboxes, Technodrive TMC30, 40, 50 & 60 gearboxes & Borgwarner 500 gearboxes.
Gearbox Spline 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter)
Diameter OD: 266.7mm (10.5")
Torque 135 Nm, 100 lbft
Bolt Hole PCD (Pitch Circle Diameter) 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23°59'07, 12 x 8.1 on 246mm PCD and 12 x 8.1 on 242mm PCD.
Number of Fixing Holes 6 Spaced in three groups of two, 12
Thickness Maximum: 32mm (1.25")
Description

22B37 R & D Marine Engine Damper Drive Plate

Fitted between the engine and the gearbox input shaft, a damper drive plate is designed to transmit the engine power to the gearbox, whilst reducing transmitted gear noise and providing a cushioned drive when selecting gear. All R and D Marine Damper Drive plates include a 'failsafe' design.

Also called the Driven Plate, Damper Plate or Clutch Plate, the 22B37 Damper Drive Plate is from the R and D range. Common applications for this drive plate include Thornycroft 80, Mitsubishi and low output Ford XLD based marine engines.

The technical details:
Spline: 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter) for small Hurth HBW 5, 10, 50, 100 & 125 gearboxes, ZF10, 12 gearboxes, PRM 80, 120 & 150 gearboxes, Technodrive TMC30, 40, 50 & 60 gearboxes and Borgwarner 500 gearboxes depending on the application.
Diameter of drive plate back plate which bolts to the engine flywheel: 266.7 mm 10.5"
Back plate fixing holes: This is a multi-punched drive plate back plate offering the following fixing holes: 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23°59'07, 12 x 8.1 on 246mm PCD and 12 x 8.1 on 242mm PCD
Drive plate maximum thickness: 32mm (1.25")
Fitted with a type B loop element for 135Nm 100 ftlb torque, which can be mounted either round on the flywheel and rotated in either direction. This drive plate element will provide linear stiffness up to 3 degrees of deflection and is failsafe.

You may also need

Customer ReviewsAdd a review

No reviews yet...

Add a review

loading
This product has been added to your basket.
Loading   Loading...