Jabsco 51080-2001 Clutched Pump For Bilge / Deckwash (80LPM / 1" BSP)
Part No: JAB-51080-2001
Jabsco manual foot mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has 1" BSP connections and is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres... Read more
Jabsco manual foot mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has 1" BSP connections and is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head.
This standard duty bilge and deckwash pump has a mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres.
Jabsco Pump 51080-2001 Spare Parts:
Part ID | Spare Parts | Part Number | Quantity
1 | Screw | X3001-147F | 6
2 | End Cover | 11831-0000 | 1
3 | Gasket | 890-0000 | 1
4 | Impeller & Gasket Kit | 17937-0001-P | 1
5 | Wearplate | 4156-0000 | 1
6 | Cam | 934-0000 | 1
7 | Screw (3 Pack) | 91004-0090 | 1
9 & 14 | Engaging Mechanism Assembly | 51090-0000 | 1
10 | Screw | X3001-178F | 3
11 | Outer Guide Tube | 51089-0000 | 1
12 | Spring | 51093-0000 | 1
13 | Inner Guide Tube | 51088-0000 | 1
15 | Retaining Bolt | 51094-0000 | 1
18 | Pulley | 51084-0000 | 1
19 | Bearing | 92600-0020 | 1
20 | Retaining Ring | SP1700-98 | 1
21 | Retaining Ring | SP1700-206 | 1
22 | Clutch Cone | 51085-0000 | 1
26 | Screw | X3001-211F | 1
27 | Spring Cover | 51092-0000 | 1
28 | Seal | SP2700-1027B | 1
29 | Slinger (3 Pack) | 3180-0000 | 1
30 | Shaft | 51087-0000 | 1
31 | Key | X4000-209A | 1
33 | Seal | 913-0000 | 1
34 | Bearing | 92600-0060 | 1
35 | Retaining Ring (3 Pack) | 18713-0000 | 1
| Service Kit | SK406-0001 | 1
| Height Description | 189mm (7.4") |
| Length | 198mm (7.8") |
| Series | 51080 Series |
| Size | Pulley Size: 150mm Diameter Single A or B Section |
| Width | 120mm (4.75") Excluding Pulley |
| Brand | Jabsco |
| Clutched Pump Pulley Size | Single A Section - 13mm|Single B Section - 16mm |
| Automatic Bilge Pumps | No |
| Bearing Type | Standard Duty |
| Maximum Pump Head | Over 4.27 Metres |
| Seal Type | Lip Seal |
| Warranty | 1 Year |
| Flow Rate 3 Metre Head | 4800LPH (1268 US GPH) at 1500 RPM |
| Maximum Recommended Head | 20 Metres (65 Feet) |
| Model | 51080-2001 |
| Replacement Impeller | JAB-17937-0001-P |
| Replaces | Jabsco Pump 6520-200 |
| Self Primes up to | 2.4 Meters (7.9 Feet) |
| Inlet Outlet | 1" BSP Female Thread |
£1,072.90
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£1,072.90 Incl VAT
0 in stock
Please check with the store before travelling to avoid disappointment
