Jabsco 50580-2201 Bronze Clutched Pump (12V / 1" BSP / 16mm Pulley)
Part No: 505232
Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and is 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable... Read more
Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and is 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head.
This bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids.
Jabsco 50580-2201 Spare Parts:
Part ID | Spare Parts | Part Number | Quantity
1 | Bearing | SP2601-0468 | 2
3 | Cam | 53082-0000 | 1
4 | End Cover | 50355-0000 | 1
5 | Electro Magnetic Clutch - Field Coil 12V | SP2300-0063FCUS | 1
6 | Screw | X3001-176FB | 7
7 | Impeller & Gasket Kit | 17937-0001-P | 1
8 | Key | SP1401-10 | 1
9 | Seal Assembly | 96080-0620 | 1
10 | O-Ring | X4020-106A | 1
11 | O-Ring | X4020-215A | 1
12 | O-Ring (3 Pack) | 18753-0263 | 1
14 | Retaining Ring (3 Pack) | 91700-0620 | 1
15 | Retaining Ring (3 Pack) | 18713-0000 | 1
16 | Dowel Pin | SP3100-10 | 1
17 | Electro Magnetic Clutch Pulley Assembly (Single 'B' Groove) | SP2300-0063RA | 1
18 | Screw (10 Pack) | X3003-176F-P | 1
21 | Spline Plug (3 Pack) | 4345-0000 | 1
22 | Washer | 29706-0000 | 1
23 | Wearplate | 4156-0000 | 1
| Fuse | 5A |
| Height Description | 101mm (4") Excluding Pulley |
| Length | 160mm (6.5") |
| Series | 50580 Series |
| Size | Pulley Size: Single B Section (16mm) |
| Voltage Description | 12V DC |
| Width | Excluding Pulley: 120mm (4.75") |
| Brand | Jabsco |
| Clutched Pump Pulley Size | Single B Section - 16mm |
| Automatic Bilge Pumps | No |
| Bearing Type | Heavy Duty |
| Maximum Pump Head | Over 4.27 Metres |
| Seal Type | Mechanical Seal |
| Warranty | 1 Year |
| Flow Rate 3 Metre Head | 4800 LPH (1268 US GPH) at 1500 RPM |
| Maximum Recommended Head | 20 Metres (65 Feet) |
| Model | 50580-2201 |
| Replacement Impeller | JAB-17937-0001-P |
| Self Primes up to | 2.4 Metres (7.9 Feet) |
| Inlet Outlet | 1" BSP Female Thread |
£718.64
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
£718.64 Incl VAT
0 in stock
Get notified when it's back in stock
0 in stock
Please check with the store before travelling to avoid disappointment
